Assemblage Div.
Machine Shop
Testing Div.
H.T. & L.T. Winders

Motor Rewinding

All Motor Rewinding between 0.1 hp - 2500 hp. AC / DC Motors use Generators from 5kw upto 1800kw with complete overhauling.

Not every motor that comes into the shop needs a rewind. In fact, there are many times when a motor rewind is unnecessary. Perhaps the armature needs balancing, or the bearings need replacing. Maybe the winding insulation resistance is low, and needs to be rejuvenated. Possibly the shaft requires rebuilding to restore a pulley fit. The list is extensive.

In these instances, you don't need a rewind, you need a recondition or repair. That is why the skilled technicians at AGECL carefully inspected and evaluated every electric motor that is brought into our service centers, in order to determine exactly what repairs were needed. A written report was given to the Service Manager, who then submits this information to you.

It may be that your motor does require a rewind. However, if your motor only needs to be reconditioned or otherwise repaired, we will notify you that this is the case, and you will benefit from the savings. On D/C armatures, we also carefully inspected the commutator mechanically and electrically. Further, you will have "peace of mind" knowing that your motor repair receives the same care and attention to detail that is given to motor rewinds. The scope of the work may be different, but the commitment to quality remains the same.

All of AGECL superior rewinds were composed of three things i.e. Materials, Technique and Commitment.

MATERIALS make up the first ingredient. The materials we used were the best that are commercially available.   AGECL begined by utilizing a Class H insulation system for all our rewinds. We began by using magnet wire which had been rated for Inverter Duty.  It will withstand more punishment and stress than standard magnet wire, and is designed to minimize the effect of electrical spikes that are inherent in variable frequency drives. All rewinds were preheated, dipped, and baked in a Class H electrical insulation varnish a minimum of two times or more, depending upon application. At AGECL, use of inferior materials to save money was NOT an option. 

TECHNIQUE is the second ingredient of a superior AGECL rewind. Our rewinds required more than simply the best materials. A AGECL rewind was the best because of the proven techniques we used in conjunction with our materials. Our techniques are the result of decades of refining rewind procedures. Every step in the rewind process had been carefully examined and refined over the years to produce the highest quality AC or DC electric motor rewinds. As if that were not enough, each rewind was then put through a rigorous testing procedure that insures it will last in the field.

COMMITMENT is the third ingredient of the AGECL AC / DC electric motor rewind. A AGECL AC / DC electric motor winder were skilled craftsman who possessed years of experience in the field. We at AGECL were self-motivated individuals dedicated to quality.

All of the above allows our rewinds to keep running long after normal rewinds have failed, which translates into more uptime and less downtime and that is what it's really all about.
We have placed photos of actual AGECL AC/ DC rewinds on this page, in order for you to see the quality for yourself.

Would you like to know more?  Then just click on the "Contact Us" button below, and call or send us an e-mail.  We will respond promptly to your request for information. TOP
Home |Contact Us | Sitemap © 2009 Al Ghaima Engineering Co.Ltd - Ghaima Group. All Rights Reserved, Site Designed By Five Online Web Design Company India.